EMF Meter Data Logger The Electromagnetic Radiation Detector

$375.00

1000 in stock

SKU: 2251832662378511 Category:

Product Description

EMF Meter Data Logger The Electromagnetic Radiation Detector

 

01TB2B0ZiwItnpuFjSZFKXXalFFXa_!!3200076872TB2THQJwNxmpuFjSZFNXXXrRXXa_!!3200076872TB2023hwUhnpuFjSZFpXXcpuXXa_!!320007687202

 

  • 50 MHz to 3.5 GHz frequency range.
  • For isotropic measurements of electromagnetic fields.
  • Non-directional (isotropic ) measurement with three-channel measurement probe.
  • High dynamic range due to three-channel digital results processing.
  • Configurable alarm threshold and memory function.
  • Easy to use
  • High frequency (RF) electromagnetic wave field strength measurement.
  • Mobil phone base station antenna radiation power density measurement.
  • Wireless communication applications (CW , TDMA , GSM , DECT).
  • Wireless LAN (Wi-Fi) detection, installation.
  • Spy camera, wireless bug finder.
  • Cellular/Cordless phone radiation safety level.
  • Microwave oven leakage detection.
  • Personal living environment EMF safety.
  • RF power measurement for transmitters.

ELECTRICAL SPECIFICATIONS
Sensor type Electric field (E)
Frequency range 50MHz to 3.5 GHz
Directional characteristic Isotropic, 3-dimensional
Measurement range (CW signal>50MHz) 38mV/m to 11V/m
Absolute error(@1V/m and 50MHz) ± 1.0dB
Frequency response (taking into account typ. CAL factor) ± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz)
Isotropy deviation Type. ±1.0dB f>50 MHz
Overload limit 4.2W/m2 (40 V/m)
Temperature response(0 to 50 ) ± 1.5dB
Note

Unless otherwise stated, all specifications hold under the following assumptions:

Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 ±3 ;relative air humidity 25% to 75%.

GENERAL SPECIFICATIONS
Measurement method Digital , triaxial measurement
Directional characteristic Isotropic, triaxial
Measurement range selection One continuous range
Display resolution 0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm²
Setting time Typically 1s ( 0 to 90% of meas. value)
Display refresh rate

Typically 400mS
Display type LCD 4 digit
Audible alarm Buzzer
Measurement units mV/m , V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm²
Measurement display value Instantaneous measured value, maximum value or average value since power-on.
Measurement average time (in per-set steps) 4s to 15 minutes
Measurement alarm function Adjustable threshold with ON/OFF
Measurement calibration factor CAL Adjustable
Manual data memory and read storage 99 sets ( only recall by meter )
Battery 9V
Battery life >15 hours
Accessory carrying case & manual

 

Notes: The package not included batteries

 

 

Related products